ANB Sensors
ANB Sensors AQ2
Part no.: AQ2 5m
Calibration-free solid-state pH and temperature sensor with no glass. AQ2 calibrates itself in the water and works in fresh and sea water, in tanks, RAS and sea cages.
ANB Sensors
ANB Sensors AQ2 300m
Part no.: AQ2 300m
AQ2 pH sensor rated to 300 m, with a 1 m cable. For deep deployments, buoys, moorings and subsea vehicles.
- No calibration and no buffer solutions
- No glass, store wet or dry
- Fresh and sea water, 0.1 to 40 ppt salinity
- Built-in anti-biofouling
- Health number tells you when service is due
- 8 GB on-board memory, over 15 million readings
Prices are given in the quote we send you.
The AQ2 300m is a calibration-free solid-state pH and temperature sensor rated to 300 m. It was previously called the OC300. It calibrates itself in the water and measures across 0.1 to 40 ppt salinity without recalibration.
It ships with a 1 m cable. SubConn cables come in 1, 5, 10, 30 and 50 m lengths. For autonomous work away from power it pairs with ANB's battery housing, and the 8 GB memory holds over 15 million readings.
A dedicated spare transducer is available for the 300 m model and is replaced in the field.
- No calibration and no buffer solutions
- No glass, store wet or dry
- Fresh and sea water, 0.1 to 40 ppt salinity
- Built-in anti-biofouling
- Health number tells you when service is due
- 8 GB on-board memory, over 15 million readings
- RS-232, RS-485 and Modbus RTU
- pH range
- pH 2 to 10
- Salinity range
- 0.1 to 40 ppt
- Temperature range
- -5 to 40 °C
- pH accuracy
- ±0.2 pH
- Temperature accuracy
- ±0.2 °C
- Resolution
- 0.01 pH and 0.01 °C
- Communications
- RS-232, RS-485, Modbus RTU
- Analogue outputs (via interface)
- 4 to 20 mA, 0 to 5 V
- Baud rate
- 9600 to 115200 (default 57600)
- Supply voltage
- 6 to 42 V DC, isolated
- Power, active
- 90 mA or 55 mA at 12 V DC
- Power, idle
- 60 mA or 5 mA at 12 V DC
- Sampling
- Every 5 s continuous, or every 10 to 240 min
- On-board storage
- 8 GB, over 15 million readings
- Depth rating
- 300 m
- Housing
- Delrin or titanium
- Size
- Ø41 x 191 mm
- Weight
- 0.3 to 0.6 kg in air, 0.04 to 0.08 kg in water
- Connector
- SubConn MCBH6M or pigtail cable
- Certification
- CE
Source: the manufacturer's specification.
More from ANB Sensors
View allANB Sensors
ANB Sensors AQ2 50m
Part no.: AQ2 50m
AQ2 pH sensor rated to 50 m, with a 1 m cable. The same calibration-free technology as the AQ2 5m, for deeper deployments.
ANB Sensors
ANB Sensors AQ2 1250m
Part no.: AQ2 1250m
AQ2 pH sensor rated to 1250 m, the deepest model in the AQ2 line. For ocean and subsea monitoring.