ANB Sensors
ANB Sensors AQ2
Part no.: AQ2 5m
Calibration-free solid-state pH and temperature sensor with no glass. AQ2 calibrates itself in the water and works in fresh and sea water, in tanks, RAS and sea cages.
All our equipment, grouped by type. Put products in your quote list and we reply with a quote.
Fixed sensors for continuous monitoring: dissolved oxygen, pH, conductivity, salinity, turbidity, chlorophyll, ammonia and temperature.
ANB Sensors, Eureka, Tecnos, AquaLabo
Waterproof handheld meters for day-to-day checks on site, from several manufacturers.
Tecnos, AquaLabo, Eureka
Transmitters, controllers, buoys and data units that collect readings, raise alarms and control oxygen dosing on land-based and sea-cage farms.
Tecnos, ANB Sensors, AquaLabo, Obscape
Caps, strainers, cables, battery housings, chargers and the rest that keeps the instruments running. Spare parts for probes and meters from our makers.
ANB Sensors, AquaLabo, Eureka, Tecnos, Obscape
Airlift pumps and equipment that move water on little energy, for circulating and aerating the water in fish farming.
FloNergia
Silos, feed lines and feeders for land-based and sea-cage farms.
Underwater and surveillance cameras for fish, feeding and conditions. Keep an eye on the fish and the feeding in a cage or a tank.
Tecnos, Obscape
Service pedestals for marinas and docks from eTecnos: electricity, water and self-service with payment by app or card.
eTecnos
ANB Sensors
Part no.: AQ2 5m
Calibration-free solid-state pH and temperature sensor with no glass. AQ2 calibrates itself in the water and works in fresh and sea water, in tanks, RAS and sea cages.
Eureka
Cost-effective multiparameter water quality sonde in two versions: EasyProbe20 measures temperature, dissolved oxygen, conductivity and pH/ORP, and EasyProbe30 adds turbidity.
Tecnos
Optical oxygen probe for monitoring and automatic oxygen control in tanks and cages. Luminescence measurement, practically maintenance free, with a replaceable cap.
Tecnos
Galvanic oxygen probe designed for fish farming and used in thousands of units. 40 mm diameter, 80 mm long, cable runs up to 200 m.
AquaLabo
Part no.: PF-CAP-C-00160
DIGISENS is AquaLabo's range of digital sensors for dissolved oxygen, pH, ORP, conductivity, salinity and turbidity. Every sensor speaks Modbus RS-485 and keeps its own calibration.
Tecnos
Wireless handheld with an optical oxygen probe: waterproof (IP67), measures oxygen and temperature, accepts more probes and uploads readings automatically to the FishControl portal.
AquaLabo
Part no.: NC-POR-C-00308
Handy oxygen meter for fish farming: NEON OPEN with a stainless steel OPTOD oxygen sensor on a 3 m cable, carrying case and sodium sulphite for calibration.
Tecnos
Stand-alone monitoring and control unit for tanks and cages: measures oxygen, temperature and more, controls oxygen dosing and sends data over Wi-Fi to the FishControl portal.
ANB Sensors
Part no.: AQ2 50m
AQ2 pH sensor rated to 50 m, with a 1 m cable. The same calibration-free technology as the AQ2 5m, for deeper deployments.
ANB Sensors
Part no.: AQ2 300m
AQ2 pH sensor rated to 300 m, with a 1 m cable. For deep deployments, buoys, moorings and subsea vehicles.
ANB Sensors
Part no.: AQ2 1250m
AQ2 pH sensor rated to 1250 m, the deepest model in the AQ2 line. For ocean and subsea monitoring.
ANB Sensors
Part no.: AQ2 5m Low Power
Low Power version of the AQ2 pH sensor rated to 5 m: 55 mA active and 5 mA idle at 12 V. For battery powered and remote deployments.
ANB Sensors
Part no.: AQ2 5mST
Spare transducer for the AQ2 5m and AQ2 50m. Replaced in the field without returning the sensor.
ANB Sensors
Part no.: AQ2 300mST
Spare transducer for the AQ2 300m. Replaced in the field without returning the sensor.
ANB Sensors
Part no.: AQ2 50m Low Power
Low Power version of the AQ2 pH sensor rated to 50 m: 55 mA active and 5 mA idle at 12 V. For battery powered and remote deployments.
ANB Sensors
Part no.: AQ2 1250mST
Spare transducer for the AQ2 1250m. Replaced in the field without returning the sensor.
ANB Sensors
Part no.: AQ2 300m Low Power
Low Power version of the AQ2 pH sensor rated to 300 m: 55 mA active and 5 mA idle at 12 V. For battery powered and remote deployments.
ANB Sensors
Part no.: AQ2 1250m Low Power
Low Power version of the AQ2 pH sensor rated to 1250 m: 55 mA active and 5 mA idle at 12 V. For battery powered and remote deployments.
ANB Sensors
Part no.: AQ2_FC
Flow cell adapter that fixes an AQ2 sensor into flowing water, such as a line from a tank or a monitoring station.
ANB Sensors
Part no.: AquaLink pH
Complete pH and temperature package for RAS: AQ2 sensor, converter with 4 to 20 mA and 0 to 5 V outputs, cabling and a maintenance kit.
ANB Sensors
Part no.: CABAQ
Cable for AQ2 sensors, cut to the length you need and sold by the metre. For measuring far from shore or the control room.
ANB Sensors
Part no.: CABAQ_SP
Splice kit for AQ cables: a joint box and two penetrators, rated to 500 m. For extending a sensor cable in the field.
ANB Sensors
Part no.: DCU/DVU300
Submersible converter that turns the AQ2 sensor's digital output into a 4 to 20 mA or 0 to 5 V signal. Rated to 300 m.
ANB Sensors
Part no.: BH14V8S
Battery housing with battery management for one 14.8 V 15.6 Ah lithium-ion battery, a self-contained power source for an AQ2 sensor. Battery not included.
ANB Sensors
Part no.: DCU/DVU1250
Submersible converter that turns the AQ2 sensor's digital output into a 4 to 20 mA or 0 to 5 V signal. Rated to 1250 m.
ANB Sensors
Part no.: BH14V8D
Battery housing with battery management for two 14.8 V 15.6 Ah lithium-ion batteries, a self-contained power source for an AQ2 sensor. Batteries not included.
ANB Sensors
Part no.: DTU Pigtail
Connects an AQ2 sensor to a computer over USB to set it up, download data and update firmware. Cable included.
ANB Sensors
Part no.: BH22V2S
Battery housing with battery management for one 22.2 V 28 Ah lithium-ion battery, a self-contained power source for an AQ2 sensor. Battery not included.
ANB Sensors
Part no.: DTU-A
Surface converter that gives a 4 to 20 mA or 0 to 5 V signal from an AQ2 sensor and also links to a PC over USB like a DTU.
ANB Sensors
Part no.: BH22V2D
Battery housing with battery management for two 22.2 V 28 Ah lithium-ion batteries, a self-contained power source for an AQ2 sensor. Batteries not included.
ANB Sensors
Part no.: IKIT
The AQ2 sensor electronics without a housing, for building the sensor into your own equipment. The transducer is not included and is chosen for the depth.
ANB Sensors
Ready-to-deploy pH and temperature monitoring for aquaculture: AQ2 sensor with controller, transmitter and touchscreen, alarms and analogue or digital outputs.
ANB Sensors
Part no.: Auto Abrader 30m
Automatic abrasion of the AQ2 sensor face at programmed intervals, so the sensor can run for up to a year without anyone attending to it.
AquaLabo
Part no.: DIVNEG
Two-sensor probe with a C4E conductivity and salinity sensor and a titanium OPTOD oxygen sensor on a 30 m cable with a Fischer connector. Built for measurements at depth in sea cages.
AquaLabo
Part no.: PF-CAP-C-00168
Digital optical dissolved oxygen sensor in 316L stainless steel with a 7 m cable and bare wires. A robust sensor for most fish farming projects.
AquaLabo
Part no.: PF-CAP-C-00244
Digital optical dissolved oxygen sensor in titanium with a 7 m cable and bare wires. Titanium gives the best resistance to seawater and corrosion.
ANB Sensors
Part no.: DTU SubConn
Connects an AQ2 sensor with a SubConn connector to a computer over USB to set it up, download data and update firmware. SubConn cable included.
AquaLabo
Part no.: PF-CAP-C-00566
Digital optical dissolved oxygen sensor in titanium with a 30 m cable and bare wires. Titanium gives the best resistance to seawater and corrosion.
AquaLabo
Part no.: PF-CAP-C-00419
Digital optical oxygen sensor for fish farming, POM-C and PVC body with the standard strainer and a 7 m cable. The most cost-effective OPTOD version.
AquaLabo
Part no.: PF-CAP-C-00422
Digital optical oxygen sensor for fish farming with the longer, more protective strainer, on a 7 m cable.
ANB Sensors
Part no.: CTU
Touchscreen and transmitter for AQ2 sensors in plants and tanks. Shows pH and temperature on site and passes the readings to a PLC over 4 to 20 mA, 0 to 5 V or Modbus RTU.
AquaLabo
Part no.: PF-CAP-C-00169
Digital four-electrode sensor for conductivity, salinity and temperature, on a 3 m cable with bare wires.
AquaLabo
Part no.: PF-CAP-C-00573
Digital four-electrode sensor for conductivity, salinity and temperature, on a 30 m cable with bare wires.
ANB Sensors
Part no.: Auto Abrader 200m
Automatic daily abrasion of the AQ2 sensor face, rated to 200 m, running from AA batteries for up to a year without anyone attending to the sensor.
AquaLabo
Part no.: PF-CAP-C-00171
Digital pH sensor with a 3 m cable and bare wires, supplied without cartridge. With a PHEHT cartridge it measures pH, ORP and temperature; with a pHT cartridge pH and temperature.
AquaLabo
Part no.: PF-CAP-C-00155
Replaceable cartridge for the PHEHT sensor, measuring pH, ORP and temperature.
AquaLabo
Part no.: PF-CAP-C-00616
Replaceable cartridge that turns the PHEHT sensor into a pHT sensor for pH and temperature.
AquaLabo
Part no.: ME-PCS-C-00317
Protective strainer that guards the cartridge of the PHEHT and pHT sensor.
AquaLabo
Part no.: PF-ACC-C-00478
Spare DODISK sensing disc for the OPTOD Plastic oxygen sensor, O-ring included.
AquaLabo
Part no.: PF-ACC-C-00479
Standard PVC strainer for the OPTOD Plastic oxygen sensor.
AquaLabo
Part no.: PF-ACC-C-00480
Longer PVC strainer that gives the OPTOD Plastic sensing disc more protection.
AquaLabo
Part no.: PF-ACC-C-00499
Copper antifouling protection for the OPTOD Plastic strainer that limits fouling and maintenance.
AquaLabo
Part no.: PF-CSO-C-00041
Strainer with integrated DODISK sensing disc for the stainless steel OPTOD oxygen sensor.
AquaLabo
Part no.: PF-CSO-C-00045
Strainer with integrated DODISK sensing disc for the titanium OPTOD oxygen sensor.
AquaLabo
Digital nephelometric turbidity sensor using 90° infrared scattering, from 5 to 4000 NTU.
AquaLabo
Digital ORP sensor with a platinum ring and temperature sensor, for example to follow ozone treatment in recirculating systems.
AquaLabo
Multiparameter probe for three DIGISENS sensors measuring up to 8 parameters at once, such as oxygen, pH, conductivity and turbidity.
AquaLabo
Part no.: PF-FIX-C-00085
Digital transmitter for two DIGISENS sensors with 4 to 20 mA outputs, relays, Modbus and Ethernet. A built-in barometric sensor compensates oxygen readings.
AquaLabo
Part no.: PF-FIX-C-00095
Multichannel digital transmitter for four DIGISENS sensors plus one third-party sensor, with a 7 inch touchscreen showing up to 12 parameters.
AquaLabo
Part no.: PF-ACC-C-00304
Regulated switch-mode AC-DC power supply that runs the ACTEON 6000 from 100 to 240 V mains.
AquaLabo
Part no.: PF-POR-C-00188
NEON OPEN handheld without sensor, with a connector for one DIGISENS sensor at a time: oxygen, pH, ORP, conductivity, salinity, turbidity and more.
AquaLabo
Part no.: NC-POR-C-00093
ODEON X handheld with two sensor inputs and Open technology, supplied as a set without probe.
AquaLabo
Part no.: NC-POR-C-00103
ODEON Open One handheld with one sensor input, supplied as a set without sensor.
AquaLabo
Part no.: NC-POR-C-00098
Oxygen meter set: ODEON Open One handheld with an OPTOD oxygen sensor on a 3 m cable with Fischer connector.
AquaLabo
Part no.: NC-ACC-C-00004
Charger cable with power supply and adapter for charging NiMH batteries inside the ODEON handheld.
AquaLabo
Part no.: PF-ACC-C-00190
Standard carrying case for the ODEON handheld and its sensors.
Eureka
Part no.: Manta+20
Portable yet rugged multiprobe with temperature, pH, conductivity and optical DO, with ORP and depth as options. Fits in a backpack and suits spot checks and profiling.
Eureka
Part no.: Manta+30A
Multiprobe with wipered turbidity, temperature, pH, conductivity and optical DO. Light enough for spot checks and profiling, tough enough for extended deployments.
Eureka
Part no.: MantaMobile
Bluetooth device that connects to the underwater cable of a Eureka multiprobe, powers the probe and sends the data wirelessly to the MantaLink app on a phone or tablet.
Eureka
Part no.: TDG
Total dissolved gas (TDG) sensor that fits a Eureka multiprobe alongside other sensors, so no dedicated TDG instrument is needed.
Eureka
Part no.: Trim DO
Trimeter, the most compact Eureka multiprobe, fitted with an optical DO sensor and temperature. A depth sensor is optional.
Eureka
Part no.: A001-20-M+EBP-LI
Top cap 2.0 assembly modified for the EBP-Li-30 external lithium battery pack. Required to attach the pack to the probe.
Eureka
Part no.: EBP-Li-30
External battery pack, 76 mm in diameter, with a rechargeable lithium-ion battery so the probe can log on its own. A stainless steel eyebolt on top serves as a hanger.
Eureka
Part no.: cable M+ 5m
5 m underwater cable with marine connector that links a Eureka probe to the mantaMobile, a datalogger or a telemetry station.
Eureka
Part no.: M+ data cable
Data cable that connects a Eureka probe to a computer or display device on the bench. Not meant for field use.
Eureka
Part no.: USB adapter
USB adapter providing communication and power to any Eureka multiprobe from a computer.
Tecnos
OxyWiFi control unit with GPS, GPRS and Wi-Fi, supplied without probes. Probes are chosen separately to suit the job.
Tecnos
OxyWiFi control unit in an IP66 cabinet with GPS, GPRS and Wi-Fi, supplied without probes. Built for outdoor installation.
Tecnos
Complete monitoring system: OxyWiFi2 in an IP65 cabinet with two titanium optical oxygen and temperature probes on 5 m and 15 m cables, plus web software without time limit.
Tecnos
OxyWiFi Plus with two solenoid valves and two flowmeters for automatic oxygen dosing, supplied without probes.
Tecnos
OxyWiFi Plus for one tank: one optical oxygen probe, one solenoid valve and one flowmeter for automatic oxygen dosing.
Tecnos
OxyWiFi Plus for two tanks: two galvanic oxygen probes, two solenoid valves and two flowmeters.
Tecnos
OxyWiFi Plus for two tanks: two optical oxygen probes, two solenoid valves and two flowmeters.
Tecnos
Waterproof Android tablet with the OxyWiFi software, used as the on-site central station that shows and controls every unit.
Tecnos
Self-contained monitoring station on a float with solar panel, optical oxygen and temperature probe and data transfer over the cellular network to the FishControl portal.
Tecnos
The OxyBuoy station without the float: solar panel, battery, optical oxygen and temperature probe and cellular data link, for mounting on a cage or other structure.
Tecnos
Underwater camera for cages and tanks that connects to OxyBuoy: video and water readings go together to the FishControl portal.
Tecnos
Current meter for sea cages that measures current speed and direction and tilt in real time, with Modbus output and an OxyBuoy link.
Tecnos
SmartOxy handheld with two titanium optical oxygen and temperature probes, one on a 5 m cable and one on a 15 m cable.
Tecnos
SmartOxy handheld with a pH probe and temperature measurement. Readings upload automatically over Wi-Fi to the FishControl portal.
Tecnos
SmartOxy handheld with a salinity probe and temperature measurement. Readings upload automatically over Wi-Fi to the FishControl portal.
Tecnos
Titanium optical oxygen and temperature probe for SmartOxy on a 10 m cable. No membrane changes and no periodic calibration.
Tecnos
Digital pH probe for SmartOxy, OxyWiFi and OxyBuoy, calibrated at two points.
Tecnos
Digital redox (ORP) probe for SmartOxy, OxyWiFi and OxyBuoy. Measures in mV.
Tecnos
Digital inductive salinity probe for SmartOxy, OxyWiFi and OxyBuoy.
Tecnos
Digital temperature probe for SmartOxy, OxyWiFi and OxyBuoy. Measures water temperature in °C.
Tecnos
Optical turbidity probe for SmartOxy, OxyWiFi and OxyBuoy. Measures turbidity in NTU.
Tecnos
Self-cleaning optical chlorophyll probe for SmartOxy, OxyWiFi and OxyBuoy.
Tecnos
Digital ammonia and pH probe for fresh water: measures NH3, NH4 and pH. For SmartOxy, OxyWiFi and OxyBuoy.
Tecnos
Container for a Tecnos multi-probe, where several probes are combined to measure several parameters at once.
Tecnos
Spare Qi wireless charging pad for SmartOxy. Place the meter on the pad and it charges in about 3 h.
Tecnos
Contactless NFC/RFID tag placed at a measuring point. SmartOxy reads it and stores the reading against the right tank.
eTecnos
Marina service pedestal moulded in one piece of plastic, with up to four power sockets and four water taps. The boat owner switches power and water on in an app and pays only for what is used.
eTecnos
Mirror polished AISI 316 stainless steel marina pedestal with power sockets and water taps that the boat owner switches on and pays for in an app.
eTecnos
A module that turns the pedestals a marina already has into smart pedestals without replacing them. Boat owners then switch power and water on and pay in an app.
eTecnos
App for boat owners that switches power and water on at Telemetra pedestals, shows consumption and takes card payment. Available for Android and iOS.
eTecnos
Software for marina staff that shows every pedestal and gate on a map, keeps the customer and boat register, tracks consumption and payments and produces reports for accounting.
eTecnos
Access control for people and vehicles that links to the Telemetra system, for example for piers, parking, toilets and the main marina gate.
eTecnos
Detectors that sense whether a boat is in its berth and pass the information to the Telemetra system.
eTecnos
Self-service station with a card terminal where boat owners top up the credit on their keys themselves, without going to the marina office.
eTecnos
LED lighting for Telemetra pedestals, a light bar or directional light, that lights the pier at night.
Obscape
Mooring system designed for the Obscape wave buoys: stainless steel chain, Dyneema line and in-line weights and floats. Anchor not included.
Obscape
The same Obscape buoy mooring with a detachable stainless steel shackle, so the buoy can be deployed at two different depths. Anchor not included.
Obscape
Solar powered station for real-time conductivity, temperature and salinity. An inductive toroidal conductivity sensor sits directly in the water, with a 15 m sensor cable included.
Obscape
Global SIM card for Obscape devices that switches between cellular networks automatically and keeps a link where signal is weak. Data credit is included and the card is managed in the Obscape Data Portal.
Obscape
Solar powered GPS tracker for buoys, vessels and other floating or rolling assets. Reports position, speed and heading to the Data Portal over cellular or satellite.
Obscape
Wireless, solar powered camera with a 12.3 MP sensor that takes images at fixed intervals and sends them to the Data Portal. Made for long-term monitoring of slowly changing processes.
Obscape
Wireless, solar powered 5 MP camera that sends images at fixed intervals to the Data Portal. Needs no mains power or internet on site.
Obscape
Solar powered water level gauge with a pressure sensor below the surface and a logger above it. Sends real-time water level to the Data Portal.
Obscape
Solar powered radar level gauge that measures the distance down to the water surface from above, up to 40 m. Nothing sits underwater.
Obscape
Lightweight battery powered wave buoy that measures wave height, period, direction and sea surface temperature and sends the data over cellular to the Data Portal. Global SIM included, mooring not.
Obscape
Solar powered wave buoy with a navigation light that measures the directional wave spectrum and sends data over cellular or satellite to the Data Portal. Three months of satellite line rental with 5000 credits included, mooring not.
Obscape
Camouflage finish for a PTM device so it blends into its deployment site. Available as rust, concrete or fouling effect.
Obscape
Stainless steel extension bracket that holds a PTM device away from the structure, for example on a bridge deck, quay wall or parapet.
Obscape
Small external 2 W, 6 V solar panel for PTM devices mounted in the shade, for example under a bridge.
Obscape
External 9 W, 6 V solar panel that plugs straight into a PTM device. Adds power at high latitudes, in low light and for power-hungry sensors.
Obscape
Iridium satellite module fitted to a PTM device so it can transmit from anywhere. The device uses cellular when available and satellite as backup.
Obscape
The PTM (Power and Telemetry Module) is the core of most Obscape devices: solar panel, battery, logger and telemetry in one housing. This version connects a third-party sensor, for example a water quality sonde or an ADCP.
Obscape
Wireless, solar powered tipping bucket rain gauge with 0.2 mm resolution that sends rainfall in real time to the Data Portal.
Obscape
Wave and tide gauge with a pressure sensor below the surface and a solar powered logger above it, for harbours, platforms, piers and jetties.
Obscape
Wave and tide gauge with a radar that measures the water surface directly from above. No underwater parts and a 40 m range.
Obscape
Solar powered wave measurement unit that mounts on a buoy, platform or vessel and measures wave height, period and direction in real time.
Obscape
Solar powered marine weather station with an AIRMAR 200WX sensor, measuring air temperature, pressure, wind speed and direction. External solar panel included.
Obscape
Solar powered onshore weather station with the METER Group ATMOS 41 sensor, measuring wind, rain, temperature, humidity, pressure, solar radiation and lightning.
FloNergia
Airlift pump that moves and aerates water at the same time, with no moving parts. Sizes from 0.5 to 8 inches, moving up to 2685 l/min.
FloNergia
Part no.: FloMov 1 in
The smallest FloMov airlift pump, 1 inch (25 mm), moving up to 22 l/min while aerating the water. Suits small tanks such as hatchery tanks.
FloNergia
Part no.: FloMov 2 in
FloMov airlift pump, 2 inches (50 mm), moving up to 123 l/min while aerating the water, with no moving parts.
FloNergia
Part no.: FloMov 4 in
FloMov airlift pump, 4 inches (101 mm), moving up to 600 l/min while aerating and degassing the water, with no moving parts.
FloNergia
Part no.: FloMov 6 in
FloMov airlift pump, 6 inches (152 mm), moving up to 1450 l/min while aerating the water, for larger tanks and recirculating systems.
FloNergia
Part no.: FloMov 8 in
The largest FloMov airlift pump, 8 inches (203 mm), moving up to 2685 l/min while aerating the water. Suits large tanks and net pens.
Part no.: ACB055M
A medium firm sponge ball of natural rubber foam that is blown through feed pipes. It carries feed dust, fat and condensation out with it and keeps the lines clean. Fits 63 mm PE pipe (SDR17).
Part no.: ACB055S
A soft sponge ball of natural rubber foam that is blown through feed pipes. It is lighter and gives more than the medium ball, so it suits lines fed by a low-pressure blower. Fits 63 mm PE pipe (SDR17).