Tecnos
Tecnos OxyWiFi2
Stand-alone monitoring and control unit for tanks and cages: measures oxygen, temperature and more, controls oxygen dosing and sends data over Wi-Fi to the FishControl portal.
Transmitters, controllers, buoys and data units that collect readings, raise alarms and control oxygen dosing.
33 products
Tecnos
Stand-alone monitoring and control unit for tanks and cages: measures oxygen, temperature and more, controls oxygen dosing and sends data over Wi-Fi to the FishControl portal.
ANB Sensors
Part no.: DCU/DVU300
Submersible converter that turns the AQ2 sensor's digital output into a 4 to 20 mA or 0 to 5 V signal. Rated to 300 m.
ANB Sensors
Part no.: DCU/DVU1250
Submersible converter that turns the AQ2 sensor's digital output into a 4 to 20 mA or 0 to 5 V signal. Rated to 1250 m.
ANB Sensors
Part no.: DTU
Connects an AQ2 sensor to a computer over USB to set it up, download data and update firmware. Cable included.
ANB Sensors
Part no.: DTU-A
Surface converter that gives a 4 to 20 mA or 0 to 5 V signal from an AQ2 sensor and also links to a PC over USB like a DTU.
ANB Sensors
Ready-to-deploy pH and temperature monitoring for aquaculture: AQ2 sensor with controller, transmitter and touchscreen, alarms and analogue or digital outputs.
AquaLabo
Part no.: PF-FIX-C-00085
Digital transmitter for two DIGISENS sensors with 4 to 20 mA outputs, relays, Modbus and Ethernet. A built-in barometric sensor compensates oxygen readings.
AquaLabo
Part no.: PF-FIX-C-00095
Multichannel digital transmitter for four DIGISENS sensors plus one third-party sensor, with a 7 inch touchscreen showing up to 12 parameters.
Tecnos
OxyWiFi control unit with GPS, GPRS and Wi-Fi, supplied without probes. Probes are chosen separately to suit the job.
Tecnos
OxyWiFi control unit in an IP66 cabinet with GPS, GPRS and Wi-Fi, supplied without probes. Built for outdoor installation.
Tecnos
Complete monitoring system: OxyWiFi2 in an IP65 cabinet with two titanium optical oxygen and temperature probes on 5 m and 15 m cables, plus web software without time limit.
Tecnos
OxyWiFi Plus with two solenoid valves and two flowmeters for automatic oxygen dosing, supplied without probes.
Tecnos
OxyWiFi Plus for one tank: one optical oxygen probe, one solenoid valve and one flowmeter for automatic oxygen dosing.
Tecnos
OxyWiFi Plus for two tanks: two galvanic oxygen probes, two solenoid valves and two flowmeters.
Tecnos
OxyWiFi Plus for two tanks: two optical oxygen probes, two solenoid valves and two flowmeters.
Tecnos
Waterproof Android tablet with the OxyWiFi software, used as the on-site central station that shows and controls every unit.
Tecnos
Self-contained monitoring station on a float with solar panel, optical oxygen and temperature probe and data transfer over the cellular network to the FishControl portal.
Tecnos
The OxyBuoy station without the float: solar panel, battery, optical oxygen and temperature probe and cellular data link, for mounting on a cage or other structure.
Obscape
Solar powered station for real-time conductivity, temperature and salinity. An inductive toroidal conductivity sensor sits directly in the water, with a 15 m sensor cable included.
Obscape
Global SIM card for Obscape devices that switches between cellular networks automatically and keeps a link where signal is weak. Data credit is included and the card is managed in the Obscape Data Portal.
Obscape
Solar powered GPS tracker for buoys, vessels and other floating or rolling assets. Reports position, speed and heading to the Data Portal over cellular or satellite.
Obscape
Solar powered water level gauge with a pressure sensor below the surface and a logger above it. Sends real-time water level to the Data Portal.
Obscape
Solar powered radar level gauge that measures the distance down to the water surface from above, up to 40 m. Nothing sits underwater.
Obscape
Lightweight battery powered wave buoy that measures wave height, period, direction and sea surface temperature and sends the data over cellular to the Data Portal. Global SIM included, mooring not.
Obscape
Solar powered wave buoy with a navigation light that measures the directional wave spectrum and sends data over cellular or satellite to the Data Portal. Three months of satellite line rental with 5000 credits included, mooring not.
Obscape
Iridium satellite module fitted to a PTM device so it can transmit from anywhere. The device uses cellular when available and satellite as backup.
Obscape
The PTM (Power and Telemetry Module) is the core of most Obscape devices: solar panel, battery, logger and telemetry in one housing. This version connects a third-party sensor, for example a water quality sonde or an ADCP.
Obscape
Wireless, solar powered tipping bucket rain gauge with 0.2 mm resolution that sends rainfall in real time to the Data Portal.
Obscape
Wave and tide gauge with a pressure sensor below the surface and a solar powered logger above it, for harbours, platforms, piers and jetties.
Obscape
Wave and tide gauge with a radar that measures the water surface directly from above. No underwater parts and a 40 m range.
Obscape
Solar powered wave measurement unit that mounts on a buoy, platform or vessel and measures wave height, period and direction in real time.
Obscape
Solar powered marine weather station with an AIRMAR 200WX sensor, measuring air temperature, pressure, wind speed and direction. External solar panel included.
Obscape
Solar powered onshore weather station with the METER Group ATMOS 41 sensor, measuring wind, rain, temperature, humidity, pressure, solar radiation and lightning.