ANB Sensors
ANB Sensors AQ2
Part no.: AQ2 5m
Calibration-free solid-state pH and temperature sensor with no glass. AQ2 calibrates itself in the water and works in fresh and sea water, in tanks, RAS and sea cages.
ANB Sensors
ANB Sensors AQ2 1250m Low Power
Part no.: AQ2 1250m Low Power
Low Power version of the AQ2 pH sensor rated to 1250 m: 55 mA active and 5 mA idle at 12 V. For battery powered and remote deployments.
- No calibration and no buffer solutions
- 55 mA active and 5 mA idle at 12 V
- For battery powered and remote deployments
- No glass, store wet or dry
- Fresh and sea water, 0.1 to 40 ppt salinity
- 8 GB on-board memory, over 15 million readings
Prices are given in the quote we send you.
Key features
The AQ2 1250m Low Power is the same calibration-free pH and temperature sensor as the AQ2 1250m, with ANB's new low power board. It draws 55 mA while measuring and only 5 mA idle at 12 V DC, so it runs much longer on batteries and suits sites with no power.
With ANB's battery housing and battery management system and the auto abrader, the sensor can measure for months without anyone attending to it. It calibrates itself in the water, has no glass and measures across 0.1 to 40 ppt salinity.
It ships with a 1 m cable. SubConn cables come in 1, 5, 10, 30 and 50 m lengths.
- No calibration and no buffer solutions
- 55 mA active and 5 mA idle at 12 V
- For battery powered and remote deployments
- No glass, store wet or dry
- Fresh and sea water, 0.1 to 40 ppt salinity
- 8 GB on-board memory, over 15 million readings
- RS-232, RS-485 and Modbus RTU
Technical data
- pH range
- pH 2 to 10
- Salinity range
- 0.1 to 40 ppt
- Temperature range
- -5 to 40 °C
- pH accuracy
- ±0.2 pH
- Temperature accuracy
- ±0.2 °C
- Resolution
- 0.01 pH and 0.01 °C
- Communications
- RS-232, RS-485, Modbus RTU
- Analogue outputs (via interface)
- 4 to 20 mA, 0 to 5 V
- Baud rate
- 9600 to 115200 (default 57600)
- Supply voltage
- 6 to 42 V DC, isolated
- Power, active
- 55 mA at 12 V DC
- Power, idle
- 5 mA at 12 V DC
- Sampling
- Every 5 s continuous, or every 10 to 240 min
- On-board storage
- 8 GB, over 15 million readings
- Depth rating
- 1250 m
- Housing
- Delrin or titanium
- Size
- Ø41 x 191 mm
- Weight
- 0.3 to 0.6 kg in air, 0.04 to 0.08 kg in water
- Connector
- SubConn MCBH6M or pigtail cable
- Certification
- CE
Source: the manufacturer's specification.
Videos
More from ANB Sensors
View all
ANB Sensors
ANB Sensors AQ2 50m
Part no.: AQ2 50m
AQ2 pH sensor rated to 50 m, with a 1 m cable. The same calibration-free technology as the AQ2 5m, for deeper deployments.
ANB Sensors
ANB Sensors AQ2 300m
Part no.: AQ2 300m
AQ2 pH sensor rated to 300 m, with a 1 m cable. For deep deployments, buoys, moorings and subsea vehicles.