AquaLabo
AquaLabo DIGISENS
Part no.: PF-CAP-C-00160
DIGISENS is AquaLabo's range of digital sensors for dissolved oxygen, pH, ORP, conductivity, salinity and turbidity. Every sensor speaks Modbus RS-485 and keeps its own calibration.
AquaLabo
AquaLabo ACTEON 5000
Part no.: PF-FIX-C-00085
Digital transmitter for two DIGISENS sensors with 4 to 20 mA outputs, relays, Modbus and Ethernet. A built-in barometric sensor compensates oxygen readings.
- Two DIGISENS sensor inputs
- 2 x 4 to 20 mA and 2 relays
- Modbus RTU and Ethernet TCP/IP
- Data logging with USB port
- Built-in barometric sensor
- IP65 housing
Prices are given in the quote we send you.
ACTEON 5000 is a fixed transmitter for two digital sensors from the DIGISENS range, such as the OPTOD oxygen, C4E conductivity, PHEHT pH, NTU turbidity or EHAN ORP sensor. Readings are shown on a backlit touchscreen and passed on as analogue or digital signals.
Two galvanically isolated 0/4 to 20 mA outputs with PID control and two programmable relays can drive aeration or raise alarms. The transmitter speaks Modbus RTU and Ethernet TCP/IP, logs data to internal memory and has a USB port for download.
A built-in barometric pressure sensor compensates oxygen readings in mg/l. It runs on 100 to 240 V and sits in an IP65 ABS housing.
- Two DIGISENS sensor inputs
- 2 x 4 to 20 mA and 2 relays
- Modbus RTU and Ethernet TCP/IP
- Data logging with USB port
- Built-in barometric sensor
- IP65 housing
- Sensor inputs
- 2 digital (RS-485)
- Analogue inputs
- 2 (0/4 to 20 mA or 0 to 10 V)
- Analogue outputs
- 2 x 0/4 to 20 mA, isolated, max 250 Ω
- Relay outputs
- 2, 6 A / 250 V
- Communication
- Modbus RTU, Ethernet TCP/IP
- Data logging
- Internal flash memory, 1 to 120 min, USB
- Display
- Backlit touchscreen 95 x 54 mm
- Power supply
- 100 to 240 V AC/DC, optional 9 to 28 V DC
- Operating temperature
- -15 to +50 °C
- Dimensions
- 213 x 185 x 84 mm
- Material
- Grey ABS
- Ingress protection
- IP65
Source: the manufacturer's specification.
More from AquaLabo
View all
AquaLabo
AquaLabo NEON OPEN with OPTOD oxygen sensor, 3 m
Part no.: NC-POR-C-00308
Handy oxygen meter for fish farming: NEON OPEN with a stainless steel OPTOD oxygen sensor on a 3 m cable, carrying case and sodium sulphite for calibration.
AquaLabo
AquaLabo DUOPOD C4E/OPTOD Titanium, 30 m, Fischer
Part no.: DIVNEG
Two-sensor probe with a C4E conductivity and salinity sensor and a titanium OPTOD oxygen sensor on a 30 m cable with a Fischer connector. Built for measurements at depth in sea cages.